4 Easy Ways To Remove Grout Haze & Why It Forms Over Tiles
Mar 20, 2023
Grout haze is a milky white film that forms on the surface of the tiles after they have been installed and grouted. Many people often grab a sponge to remove grout haze after noticing it. They believe this will remove any extra grout left behind, only to have the milky white film resurface. Just when you thought you had spent enough time on your hands and knees cleaning up what you could see, the reality surfaces.
As the grout job dries, small particles leave a haze. This last sliver of grout byproduct requires extra care and elbow grease. Something that once appeared an easy matter to clean up now necessitates additional cleaning to eliminate the residue.
Why Grout Haze Forms Over Tiles?
You wash away the extra grout with a sponge after grouting your tiles. However, a small amount of grout is sometimes left behind, resulting in a yellowish haze. It is possible that you might not see it right away, especially if the tile is still wet. The haze often emerges after it has dried. After installation, you have a few options to remove any leftover grout from ceramic tile. Acting quickly usually yields the best results. Grout haze can form over porcelain, ceramic, or natural stone tiles. The durability of natural stone tiles allows you to remove grout haze without any major difficulties.
4 Easy Ways To Remove Grout Haze
Wipe The Tile With Dry Cheesecloth
In some conditions, removing haze from newly laid tiles could be as simple as wiping them with a dry cheesecloth. The sooner you do this after grouting your tile, the more effective it will be. However, you must first allow the grout to dry for at least 24 hours. This procedure will work if the grout haze is caused by loose or readily removable grout on the tile surface. After loosening the grout with the cloth, sweep or vacuum away the leftovers to clean the floor or counter.
Rub With a Damp Towel
If a dry cheesecloth is not working, try soaking it in plain water and wringing away the excess. The material should be damp but not dripping wet. Gently rub each tile with a bit of elbow grease to remove grout haze. The humidity can occasionally reactivate or moisten the grout on top of the tiles, making them easier to remove. You can also use a damp sponge to complete the task.
Diluted Vinegar Mixture
If water is not enough to clean smooth porcelain or ceramic tiles, vinegar is an option. However, do not use it on any stone, slate, or other porous tile material, since the vinegar's acidity may damage the tiles. Combine four parts of water and one part white vinegar to use on porcelain or ceramics. Use a delicate cloth dipped in the vinegar mixture and wipe the tiles with it. If necessary, add more vinegar to make the mix stronger. To eliminate any residual vinegar, wash the tiles with normal water once the rubbing is done.
Use The Grout Haze Remover
If you are still struggling with hazy grout leftovers on paver patterns, it is time to switch to a grout haze remover. Epoxy grout haze often necessitates using a product specifically designed for that type of grout. Many grout remover chemicals are acidic; hence they do not work well with natural stones and might damage them. Acidic cleaners can etch your new tile. Always use a grout haze remover specifically designed for the tile you have installed.
When utilizing chemical cleansers, make sure you work in a well-ventilated location. You can obtain additional protection by wearing a mask and gloves. Depending on the product, you may need to spray or wipe the cleaner onto the tile. Follow the packaging instructions for using the remover.
Tips To Follow Before You Remove Grout Haze
Before you remove grout haze, make sure your tile surface is completely dry. Allow for complete hardening of the grout. This might take roughly 24 hours on average. To find the exact drying time, consult your installation professional or the packing of your grout if you did it yourself.
However, the grout haze should not be left for more than ten days. If you do, you may need to use more potent, full-strength removers. In some cases, if the haze deposits over the flooring, you may need to go for natural stone restoration.
Check to see if your grout is epoxy-based. The haze that forms will be more difficult to remove because this type of grout is designed for maximum strength and stain resistance. You will almost certainly need to use an industrial cleaning product. Contact the grout manufacturer if you have any queries regarding which cleaner to use.
Decide on the type of tile you want to use. This will also have an impact on the cleaner you can use. Porous stone and slate tiles should not be exposed to acidic cleansers such as vinegar. The elimination of haze becomes more complex, although not impossible, due to this. You will have the finest results if you use a specific cleaner.
Conclusion
The best way to clean your grout and tile depends on the type of grout and tile you use. Grout haze is more difficult to remove than the dirt and filth that accumulates on your bathroom floor due to daily use. You can clean some new grout haze with a moist cloth; however, some cases may necessitate the use of special products. So brush up on your restoration materials, then use our method to remove grout haze to eliminate the cloudiness as soon as feasible.