How to Remove Stains from Pavers [Effective Cleaning Methods]

When you install pavers in your outdoor area, for a few months or a year or so, it may look beautiful. But with time, as people come & go and the weather changes, you will see that your pavers start to look a bit different from what they were at the time of installation. The reason being the stains, dust, dirt, and different weather conditions. So, to get rid of that and to remove stains from pavers, there are a number of things you can do.

You should clean, maintain and, if needed, seal them to keep their beautiful look for years. Of course, your pavers may experience different kinds of stains, including oil & grease stains, paint stains, rust stains, dust & dirt on the surface, etc.

So, removing these types of stains might seem an impossible task for you. But don’t worry; we are here to help you. In this article, you’ll find the step-by-step procedure to clean these tough stains from your pavers.

But before moving on to the steps to clean your pavers, have a look at some of the general but important tips.

Essential Tips to Keep in Mind Before Cleaning

These are some guidelines and important tips you should follow before you start cleaning your pavers. You should follow these tips wisely to remove stains from pavers.

You should discuss with the manufacturer from where you purchase your natural stone paving. They will perfectly guide you through the cleaning process.
Before you start cleaning your pavers, test your cleaning product on the area that is not easily noticed. With this, you will get an idea of how your cleaning product is performing. If all goes well and you get good results, apply the agent on the entire surface.
You should always read the instructions given on the cleaning products. Follow the steps exactly as mentioned.
Try to remove the stains as soon as possible. It’s best if you remove these stains immediately.

How to Remove Stains from Pavers?

Now you’ll look at the step-by-step process to remove stains from pavers. You’ll learn to remove different types of stains, including oil, grease, paint, rust, etc. However, before applying any cleaning products, water or soap, ensure to sweep away all the dirt and dirt from the surface.

How to Remove Oil Stains from Pavers?

Oil stains can be of different types, including oil from vehicles or it could be food oil. So, to remove oil stains from pavers, you need to follow these steps:

First, fill the bucket with a mixture of warm water and pavers stain removal. Now follow the manufacturer’s guidelines to dilute the mixture.
In the soapy water, dunk a deck mop. You should remove as much oil and grease as you can by wiping your pavers.
Use cat litter or talc to cover any oil or grease spills. Give it 24 hours to absorb the oil.
Use a broom to sweep up the talc or cat litter. Until the stain is gone, repeat the process.

Also, you should know how to choose paver colors, so they won’t be easily noticeable if there are tough stains.

However, if you find that oil stains are freshly deposited, lightly blot the area with clean paper towels. Apply laundry detergent or liquid dish soap directly to the stain and leave it for around 30 minutes. Scrub the surface with a nylon bristle and rinse with warm water. You should repeat this until the stain is removed.

How to Remove Rust Stains from Pavers?

Rust stains are one of the toughest stains your pavers might experience. If you keep steel or iron items on your concrete or granite pavers for longer, your pavers may experience rust stains. Irrespective of the type of pavers you have installed, these steps will help you remove stains from pavers.

So, removing rust stains becomes extremely necessary to avoid damaging the surface and the look of your pavers. You should use rust remover materials to remove stains from pavers. Read the instructions and guidelines as mentioned in the cleaning material. Remember to first test on the area which is not easily noticeable. Once you get the desired results, apply the pavers stain removal wherever required.

How to Remove Food Stains from Pavers?

Sometimes food stains also become tough and difficult to clean. So, to remove the food stains from pavers, you should follow the below steps:

Onto a tiny bowl or paper plate, add a small amount of liquid dish soap, hand soap, or laundry detergent.
Soak an old toothbrush or other soft-bristled cleaning tools in the soap. On any blemishes or stains on the paver, rub directly. Avoid diluting the soap.
Give the soap 30 to 60 minutes to absorb into the paver.
Pour as much hot water as you can tolerate touching into a bucket. In the heated water, dunk a medium-bristled cleaning brush. Cleanse the paver to get rid of any soap residue. Till the stain is removed, carry with the procedure as necessary.

If required, you can also use paver sealant to seal your pavers and maintain a beautiful look for years.

Conclusion

To remove stains from pavers, you must have proper cleaning products and follow the steps mentioned above. With this, you can bring back the beautiful look of your pavers.