- Sunset Buff, as its name suggests, it represents the scenario of sunset by its buff shades and tone.
- Sunset Buff has hardly any visible pattern. So, it seems in a consistently plain in appearance.
- Sunset Buff is sandstone and can prove an excellent choice among the natural stone materials to use in the creation of outdoor firepits in your patios and landscape designs.
- Firepits demand extremely heat-resistant material to withstand the longer lifespan.
- Sandstone rocks have built-in capabilities to tolerate high temperatures, and it makes it ideal natural stone material for firepit like outdoor utility features.
- The sandblasted surface finish makes it dazzling selection. Beveled edges enhance its utility further.
- Sunset Buff has excellent surface texture and augments the overall aesthetics of firepits in your outdoor landscape design.
Natural stone Pavers Inventory at World of Stones USA contains different shades with unique properties & characteristics.
Surface Finish - Sandblasted
Edge Finish - Sawn
|Standard Laying Pattern||Repeatable Laying Pattern|
|Natural Stone Paving Laying Guideline||Porcelain Paving Laying Guideline|
|Installation Guide for Natural Stone Paving||Installation Guide for Porcelain Paving|
1. CHECK YOUR PRODUCT
Before any work is carried out, each piece of natural stone should be inspected, both wet and dry, prior to laying as pieces will vary. No returns can be accepted once the product is installed, so it is important to confirm you are happy with your product before proceeding. When work begins, ensure the area is cleared of all vegetation and debris. Then, ideally using a scaled drawing of your planned area, you can start plot pointing by marking out the space using pegs and a string line.
2. PREPARE YOUR BASE
3. LAY YOUR SLABS
1. CHECK YOUR PRODUCT
Ensure that you check your product before laying – we recommend dry laying a random selection of your slabs (from more than one pallet where applicable) to ensure that you are satisfied with the colour variation in the slabs. Claims or returns based on colour variation will not be accepted once the product has been laid. Ensure that whilst working with outdoor paving slabs that they are rested on wooden battens to prevent any edge chipping.
2. PREPARE YOUR BASE
Prior to installation, all necessary ground work should be completed. This includes ensuring there is a sub-base of at least 50 – 100mm thick of type 1 material (hard-core) which has been sufficiently compacted down, with a suitable water drainage fall (a fall of 1:60 is usually adequate).
3. PRIME YOUR SLABS
4. USE A FULL BED OF MORTAR
Just like natural stone products, World of Stones USA Cerapave Porcelain paving must be laid on a full wet bed of mortar. We recommend a mixture of a moist consistency (rather than runny) with approx. 4:1 sharp sand to cement.
Please remember that with all World of Stones USA products – the spot laying method is not suitable!
5. LAY YOUR SLABS
It is essential that each slab is tapped down to ensure as much of the slab as possible comes into contact with the mortar. When laying your project, ensure that you mix slabs to achieve an overall blended appearance. While the finishes of Cerapave Porcelain paving have less surface variation than natural stone, they are still designed with a level of variation to add a range of texture to their surface. If within the selection of slabs you encounter any repeat patterns, we suggest that you rotate slabs 90/180 degrees in order to minimise the appearance of repetition (this may be more prevalent in slabs which have a more extensive surface pattern).
6. CUTTING CERAPAVE PORCELAIN PAVING
Cerapave Porcelain paving can be cut with a disc cutter fitted with a suitable-for-porcelain paving diamond blade (this must be a petrol disc cutter as you must feed the disc with water to cut). However, for neater and more accurate cutting, we recommend using a suitable water-fed slab bridge saw. Ensure that appropriate protective clothing is worn while operating machinery.
7. CHECK YOUR JOINTS
Allow for 10-12mm+/- approx joints when laying the slabs. We suggest an outdoor jointing compound (suitable for porcelain paving) should be used with our Cerapave Porcelain paving products – please speak to your merchant or landscaper for the most appropriate jointing compound for your project. As stated, World of Stones USA Cerapave Porcelain paving products are not designed to be butt jointed.
8. IMPORTANT – CLEAN THE JOB
It is particularly important to work cleanly when laying Cerapave Porcelain paving, both during and after installation. Once the job is completed, additional cleaning may be required if any residue remains, particularly from jointing compounds. Ensure that the jointing compound has set sufficiently and then clean the slabs with a suitable residue remover (depending upon which jointing compound has been used). Any residue left over from the laying process must be removed as soon as possible – failure to do so may result in staining on the surface of the slabs. If your Cerapave Porcelain paving has been laid in conjunction with any natural stone, ensure that the porcelain paving cleaner/residue remover you are using does not contain any acid and check they are suitable for porcelain paving.