How to Replace Sand Between Pavers

Pavers are an essential part of building a landscape. The majority of the residential houses, resorts, hotels, commercial outlets, etc have pavers installed outside their space just not for aesthetics but other purposes as well. From impressive patios to striking driveways and walkways, the selection and maintenance of pavers play a pivotal role in any industry.

Pavers are durable and come in ample materials, shapes, sizes, textures, and colors to make our vision come to life. While installing the pavers, it must be properly executed with minute precision to obtain professional results. For accurate interlocking of individual pavers, sand for pavers joints is recommended. Pavers are often exposed to harsh elements of nature like wind and rain due to which the sand for pavers joints gets washed away.

How to keep sand between pavers

Sand is one of the oldest and the best options for gap-filling the pavers. When the question arises “How to keep sand between pavers?” you need to ensure the sand as joint material is applied correctly. The material of the sand also matters. Make sure coarse and grainy textured sand is used so that when it is pushed together and the edges move, the sand gets adjusted and locked well.

While creating patios or driveway pavers for walkway pavers, execution of all the installation steps of pavers will increase the lifespan of the pavers. A glitch or failure could result in pavers sinking, shifting, or becoming uneven. But do remember that the sand used for bedding is not the same sand used for filling the gaps between pavers.

There have been cases where loose sand was used and due to heavy climatic conditions, it was washed away. Hence, in such cases, one can protect the joint sand from washing out by sealing the paver surface.

We are sure the next question that would arise in your mind will be:

“How to seal pavers with sand”

Sealing restores the aesthetics of your pavers. The sand for pavers joints can be replaced by pouring polymeric sand over the existing patio pavers or driveway pavers. The solution lies with polymeric Sand which is used to fill the complete depth of the paver. Joints that are between ¼ inches and 1.5 inches wide, suits appropriately for polymeric sand.

Polymeric sand is a special blend of sand with additives. It has the potential to reduce insect penetration and weed growth. Now to seal the pavers, firstly, spread the sand evenly across the pavers and with the help of a sturdy broom start sweeping from one corner to the other. The sand should look fairly compact when it is done.

Secondly, once the sand is settled between the pavers, the excess sand from the paver surface can be swept off with the broom. Thirdly, sprinkle the paver with water using a spray nozzle as the sand needs to settle in the joints where pavers meet. Wash away the excess sand and allow it to dry. Foot traffic can be allowed post 4 hours and make your patio or driveway look brand new again.

The sealers keep wearing off every few years. Therefore seal them again to keep the pavers looking brand new and also amplify their battle against weed or insects. The old polymeric sand from a paver can be removed using this below the idea. Use a hot water pressure washer at 180°F. The heat generated will reactivate the polymers in the product and allow the sand to be stripped away. Similarly, if the area is not that huge, use boiling water

Natural Stone Vs Pavers!

Do you tend to neglect your patios while designing a building or a house? Even while building a gazebo or paving an entire driveway, natural stone pavers play a pivotal role in offering versatileness and aesthetic appeal.

A lot goes into designing the patio or driveway pavers right from the vision to budget to aesthetics and material. As everyone loves their outdoor area as much as they love their indoors, quality material of natural stones should be preferred.

Pavers are man-made as they are manufactured instead of quarried. They look like natural stones and can be made in any shape or size. They are easier to install than natural stones and they tend to stay cool under the sun. Hence protecting your feet even if you walk barefoot.

Whereas the Natural stone will have a rough-cut look. But choosing the stone is purely a personal preference. A combination of both can also be opted to create a different look altogether.

Natural stones have been highly favoured in the construction industry for many years. With the advent of technologically produced ceramics and porcelain for various interiors and exteriors, natural stone is considered the most luxurious There are ample options available for natural stone pavers to complement your home or driveway. Going into the basics of the making of natural stones, it is dug out of the earth where it initially got formed millions of years ago. Once dug, it is cut into various desired shapes and sizes.

Natural stone pavers come with myriads of options for types of stones, colours, styles, patterns, textures, and finishing. They have that earthy look combined with an opulent and textured look. What makes them different is the attributes like strength, durability, aesthetics, and style.

Natural stone pavers are not at all slippery, even when wet as they undergo different polishing and coating treatments. They are suitable for internal flooring as well as external flooring. Places such as backyard patios, treads, garden stepping, pier caps, copings, sills, and driveway flooring.

To Sum Up!

Natural Stone pavers are the most durable, sturdy, easy to maintain, weather-resistant, long-lasting, and cost-effective than standard options such as woods, bricks, cement-concrete, and manufactured tiles. They are the most accepted solution for exterior flooring applications.